Water Heater Pilot Lights But Won't Stay Lit. If it doesn’t, remove the tube and clean it again. That current is powered by the heat that comes from the pilot.
Purge air or debris from the gas lines. Check and open the gas supply, inspect and clean the pilot light assembly, reset the gas valve, relight the pilot properly, check for leaks, and consider flushing the heater if needed. If there is no gas, the pilot obviously won’t ignite.
Web 1.1M Views 10 Years Ago.
Check and open the gas supply, inspect and clean the pilot light assembly, reset the gas valve, relight the pilot properly, check for leaks, and consider flushing the heater if needed. That current is powered by the heat that comes from the pilot. Web this hot water heater will not light.
When The Gas Burner Comes On, Use A 50/50 Dish Soap/Water Mix To Test The Screw Joints For Air Bubbles That Indicate Leaks.
Shield pilot from drafts and clear intake air obstructions. However, if you test with the multimeter and do not get the expected reading or there is no reading at all, the thermocouple is indeed the culprit and needs replacement. Make sure the gas supply is on and check the gas pressure.
Plumbers And Electricians Can Easily Replace Your Thermocouple, But It’s Ideal To Inspect It First.
Web if the pilot light won’t stay lit on water heater, it could be due to debris, dirt, and other particles blocking the pilot tube. A defective gas valve so, the most common reason for many people having this problem stems from having a gas valve that is not working as it should. Web quick fixes for ge water heater pilot light won’t stay lit;
Replace The Thermocouple, Thermostat, Or Ignitor If Needed.
Dirt in the gas chamber if there is dirt and debris in the gas chamber, the pilot light won’t stay on; Shut off your gas valve before you do anything so that your water heater is safe to work. I am able to get the pilot light to light and after a short delay, the indicator light on the control valve led status light begins to flash normally.
Web How To Fix.
When you’re done, test the heater on and see if the pilot light stays lit. Thermocouple a bent, dirty, or damaged thermocouple could be the reason your water heater pilot won’t stay lit. How to light your water heater: