Ao Smith Hot Water Heater Lighting Pilot. Remove the black connector on the gas valve if the pilot lights but the status light does not flash, check the gas control valve's electrical connections. Make sure the gas control valve is turned to hot and wait for the water heater to heat back up.
Make sure the gas control valve is turned to hot and wait for the water heater to heat back up. Turn the control valve to “on”. Web step 1 take the access panel off the side of the a.o.
I Cannot Get My Pilot Light To Light.
Make sure the gas supply valve is turned on. So, let’s get started right here. Web there is a simple solution to a sealed flame chamber water heater with a honeywell controller that keeps shutting off the pilot light.
If You Smell Gas, Don’t Dare To Operate The Unit And Call The Gas Supplier Company For Help.
Web newer water heater models have a smaller pilot light, which may be hard to see. And here is how you can do it. Here, i will break down five main culprits that prevent the status light from blinking.
You Can Check The Manifold Pressure Using The Test Port In The Main Control Unit Or Gas Valve.
A gas water heater may produce condensation the first time it is lit. Web visit our amazon affiliate storefront link below for many fun products. Web ao smith water heater won’t light or stay lit [solved] 1.
Web An Ao Smith Water Heater Pilot Light Is Likely To Go Out Due To A Failed Gas Valve.
Step 3 set the gas control knob to the pilot position. Web relight the pilot light. Web ao smith water heater has no status light.
This Problem Is Uncommon But Not Improbable.
Web easily light / relight pilot light on your ao smith or other gas water heater in just 1 minute! Carefully remove the black connector on the gas control valve. For example, you should never open the inner door of this unit and try to light the pilot by hand.